Some applications use glass blades

 It should be noted that the pre-alloy powder has been laser welded diamond saw with wood powder material of the buffer layer growth of the target object of [17,23], because: the pre-atomized powder alloy powder manufacturing process used to ensure Average ingredients conducive compressive and flexural strength improved sintering products; may reduce the brick saws  sintering temperature and shorter sintering time, especially the fate of more obvious when using ultrafine or nano pre-alloy powder; favor of pre-alloyed elements diversification and reduce the amount of cobalt. Built with reinforced concrete for large-building, with a diamond wire saw cutting orderly enumeration is very convenient, and did not happen very big noise and dust.
  2 welding process laser welding diamond saw blade woodworking are differences thick welding dissimilar materials, the impact of the tile cutter  identity of many of its welding quality, collecting the preparation before welding, laser beam quality, laser power, welding speed, focal position of the laser beam offset , the angle of incidence of the laser beam, care of the gas flow, and now in this regard should be said that the fighting strength mature.
 But the transition layer can not contain low melting point metals such as tin and other elements, these elements easily because of evaporation and vaporization stomata occur, but can intervene from a small amount of solid solution strengthening, adding to abrasion and cut and weld concrete polishing pads  porosity dip  r mn elements. Thus, in the process of these spaces can easily be metal shavings clogging the worst is leading to "burn" the work and become waste. , In the beginning of cutting and curb cutting, do not feed too fast to avoid broken teeth and damaged.