Matters related to the use of the saw blade

Precautions blade using:
 1 Keep alloy saw hanging vertically on the drying rack, be sure to avoid damp places, do not alloy blade flat on the floor or shelf, flat lead alloy blade deformation.
2 When using, do not exceed the  abrasive flap wheels specified maximum speed. After the speed of calculation is attached for reference.
3 When used, must be with shields, gloves, helmets, safety shoes, safety glasses.
4 When installing alloy saw blade, you must first confirm the performance of the saw table, uses, it is best to read the manual saw table. Avoid loading the wrong, causing an accident.
5 When installing alloy blade, alloy blades must first check whether there is a split, distort, fill level, after the  masonry drill bits fall of teeth and other phenomena, then install it.
 6 super-hard alloy saw sharp serrated prohibit collision, falling to the ground, must be gently.
7 After loading alloy blade, you must confirm the center hole of the blade is firmly fixed on the saw table flange, gasket must be good washer; then gently push the hand saw blade confirmation piece rotation is eccentric shaking. 8 alloy blade must cut direction indicated by the diamond bandsaw blades  arrow is aligned with the direction of rotation of the saw table. Do not install the opposite direction, installed the wrong direction can cause tooth out.
 9 preroll time: After replacing the alloy saw blade, before use pre-turn for a minute, let the saw table to enter the work state, to be cut.